Compact Portable Vulcanizer Press Made For Rubber Conveyor Belt Of Aluminium With Water Cooling System

Conveyor Belt Frame Vulcanizing Equipment DSLQ-F have aluminum frame that allows for quick and easy operations. Offer great hot vulcanized splicing for all fabric ply belts. The frame includes end handles and positioning rings (for larger models), it can easy to maneuver into the desired splice position.

Product Information:

1. Design Style: Frame style
2. Pressure System: Standard Rubber Bag, air pressure
3. Operating Pressures: 7 bar (100psi)
4. Splicing Belt type: EP Belt
5. Cooling: Water cooling;
6. Heating Platen: Electric shielded resistance or silicone elements

Optional: 

1. Silicon Heating element is optional
2. Lifting Rings on top frame (easy for lifting)
3. Manual Water Pump

If you need anything of Frame press, be free to contact us.

Features: 

1. It is designed for fast and dependable belt splicing.
2. lightweight, portable frame press.
3. Solid aluminum frame style.
4. Use uniform pressure system, new style pressure bag, pls refer to below details.
5. Upper and lower rugged aluminum frames.
6. Rapid cooling system within platens, cooling down from 145 °C to 75 °C, only 5 minutes.
7. Lightweight aluminum nut & bolt set
8. Some units can work together.

How to order

• Heating platen dimension
• Max belt width
• Working pressure, 100PSI or other pressure
• Rectangle style or rhomboid style (standard is 22 degree)
• Working Voltage and phase no.
• Any other special requirements

Main Components

Specifications:

Heating platen

Beltwin platen constructed from extruded plank, heating element and durable composite insulation. Each platen contours to belt irregularities, ensuring for whole splicing area. Platens available, either rhombic or rectangular design. Maximum temperature 325°F(160℃)

Frame

Aluminum frame have 2 parts, upper part includes frame and upper heating platen, lower part include lower heating platen, pressure bag and frame. Ends equipped with retractable carrying handles on smaller models.

Pressure bag system

Can used for both water and air, normally, used air pressure, via air compressor.

Automatic control panel

With time control and digital temperature control. After heating temperature of both platens, the dwell time, the cooling temperature and the pressure have been set, the whole splicing process will run automatically. All the parts use high quality electric devices with CE certificated. In case of electronic controller failure, manual operation is possible as well.

Heating Platen Dimension: (other dimension pls freely to contact with us)

Bias angle   22° degree, rectangle or any other on request

Order Table Of DSLQ-F Vulcanizing Frame Press:

Heating Platen Drawing

A= Length of heating platen along belt

B= Width of heating platen across the belt on the bias 

C= Belt width

D= Bias angle

H= Vertical length of platen

• Maximum operating pressure is 100PSI.
• Maximum temperature is 325℉ (160°C)
• Heating platen dimension: 

Vulcanizing Frame Press Delivery Photos:

Heavy Duty Design Vulcanizing Frame Press Of Rubber Conveyor Belt Special For Workshop Use: