Waterbag Hot Vulcanizing Press for Rubber Conveyor Belts DSLQ-II

Product Information:

1. Design Style: Sectional style
2. Pressure System: Common Pressure Bag, with frame and rubber (water pressure)
3. Operating Pressures: 14 bar (200psi).
4. Splicing Belt type: EP or ST rubber conveyor belt
5. Cooling: Water cooling;
6. Heating Platen: Electric shielded resistance
7. Bolt & Nut: External type, need work with wrench

Optional:

Electric Pressure Pump If you need anything of sectional press, be free to contact us.

Description:

It’s vulcanize equipment for repairing & splicing of conveyor rubber belt. The main parts of vulcanization joint machine are made of high strength aluminum alloy. Vulcanizing Equipment for steelcord belts, 200PSI pressure with fast water cooling system. The machine in the photo is for ST4500, belt width 1600mm.

Application:

1.It’s vulcanize equipment and tools for repairing & splicing of conveyor belt.

2.It suits for various conveyor belt, such as EP, Rubber, Nylon, Canvas and Steel cord belt, etc.

3.The belt vulcanizer is dependable, lightweight and portable machine, which is widely used in the field of metallurgy, mining, power plants, ports, building materials, cement, coal mine, chemical industry, etc.

Specification:

Structures:

1. Aluminum Frame (Spanner Bars)
2. Clamping devices
3. Padding platen (By user)
4. Bolts
5. Nuts
6. Gaskets
7. Heat insulation board
8&9. Upper and lower heating platens
10. Hydraulic Board (Pressure bag)
11. Pressure Pump (Auto or manual pump)
12. Control box

Heat platen

Each plate is constructed with aluminum flexible platens that contour to the conveyor belt surface during splicing. Use new rapid cooling system within platens. Maximum temperature 200°C.

Pressure

Pressure pump with pressure gauge, allows easy application of pressure up to 200PSI. For steelcord belting, standard will be auto pressure pump, if with water cooling system, will also have one cooling pump.  (Pls note that, if have any special requirements of the cooling pump working pressure, pls inform us before order)

Pressure bag

Easy for maintenance

Cross beam

Aluminum Frame (Spanner Bars), made of high quality aluminum are engineered for any belt width or operating pressure. High tensile steel nut/bolt assemblies

Control box

With time control and digital temperature control. All the parts use high quality electric devices.

Accurate

• Vulcanizing temperature:145℃(adjustable 0~200℃)
• Temperature-rising time (from normal temperature to vulcanizing temperature): no more than 50 min, accords to different conditions, actually, normal conditions, is around 25~30 mins.
• With fast cooling system, cool down from 145℃ to 75℃, only need 5mins Time of heat preservation for vulcanizing could be adjusted according to thickness of rubber belt;
• Steel cord Conveyor Belt Strength: ST630 ST800 ST1000 ST1250 ST1600 ST2000 ST2500 ST2150 ST3500 ST4000 ST4500 ST5000 ST5400
• Power Voltage: 380V. 660V. 480V. 440V. 415V. 400V or 220V
• Standard length of the heating platen is 830mm. Other size of heating platen also available, 1000mm, 1200mm, 1300mm, 1400mm etc. Also for splicing steelcord conveyor belting, generally will use several units work together.
• Waterbag Press for 1.4Mpa (200 psi) surface pressure for steel cord belts

• Degree of the heating platen: 22 degree bias angle or 17 degree or 20 degree, rectangle and other degree is optional.

When order, pls supply below information, our engineer will make a solution for you.

1. Max belt width
2. Heating platen length (or pls supply belt manufacturer’s recommended splice length)
3. Working Voltage