Why Choose Automatic Finger Puncher For Punching Fingers On PVC/PU Belts?

Publish Time: Author: Site Editor

But did you face these problem when actual working?

A.The machine can only punch fingers on under 3-4mm thickness PVC/PU belt ; the belt will get stuck in the finger blade when too thicker, have to manually cut to make fingers for thick belt.

B.Waste belt material on both side when punch fingers ,especially waste many belt material when punch fingers on large number belts.

C.The belt fingers can not be so long, general longest 70-80mm ,but you want longer fingers ( For example :100mm or 110mm).

D.Can not get beautiful belt fingers ,perhaps the edges may not be cut neatly.

E.Worker need always operate the machine, the labour charge is high.

F.If you have large number punching ,perhaps have to change the finger blade board in 3-6 months ,you need pay extra cost to buy new blade board after purchase machine.

G.The vibration and noise of the hydraulic type machine may be relatively loud, which will affect your good mood.

  In response to these problems, we have developed an Automatic Finger Puncher. This machine has been in the market for many years. 
  In 2020, the sales volume in China had exceed 100 PCS. The production process is very mature and have mass production. You can choose suitable size suit for 300 -5000mm width PVC/PU belt, and the machine has the following advantages:

1. We improved the blade, canceled the design of the finger blade board, installed the blade in the punch head,you will find:
1) This design is very safe, workers will not be cut by blade during operation;

2) Thick belts can be easily punched. For example, customers in the stone industry use this machine to punch 11mm marble conveyor belts. The effect is very good,you don’t need worry take long time to punch fingers on thick belt, automatic machine bring convenient,high accuracy and high effective.

3) After long-term use, only need to replace the blade can be reused, saving a lot of use cost,

For example,

If there are large number punches every day, the life of a finger blade board is about 3-6 months. If 4 blade board are replaced a year, the purchase cost will increase by about 1000-1600 USD.For example,
If there are large number punches every day, the life of a finger blade board is about 3-6 months. If 4 blade board are replaced a year, the purchase cost will increase by about 1000-1600 USD.

But the automatic finger puncher only needs to replace the blades, one punch needs 2 blades and the replacement cost is only approx 20-30USD.

4) When the blade board get old, there is no need to change the entire blade board, which is very heavy and takes time to adjust. For automatic finger puncher, only needs to replace the punch head of different specifications, which is easy to operate and very fast.

2. All operations can be completed by on the control panel, the operation is very simple, and the learning cost is low.

3.Automatic finger puncher can help you save a lot of conveyor belt materials when punching:
For example,
Use an ordinary finger puncher to punch fingers on belt, at least 6-10cm length belt material is wasted for each belt.
Punch 1000pcs 1meter width belt will waste 60-100 ㎡ belt materials.
The price of conveyor belts is very expensive in 2021, the cheapest green conveyor belt is approx 7 USD/㎡, and 1000 pcs punch will waste 420-700 USD. 
If it is an expensive belt, you can image the cost of wasted materials is very high!

For automatic finger puncher, it can continuously punch, and the efficiency is very high. Even punch 1000pcs, it will only waste 6cm length of the belt, the wasted material is negligible.

4.Automatic finger puncher use air power to punch fingers, the belt finger shape is very beautiful, there will be no burrs.

5.Workers can operate other machines at the same time, such as joint work, when automatic finger puncher is working. Greatly improve work efficiency!

6.Intelligent setting, the punch head will automatically return to the starting point after a complete stroke; you can also change the position of the sensor on the slide rail, and the punch head will automatically return to the starting point after touch sensor.

If you interested in this machine, pls feel free to ask.

https://www.beltwin.com/for-pvc-pu-belts/automatic-pvc-pu-belt-finger-puncher-tb1000-4000

 

TOP